Is this a support double?
#1
Posted 2014-February-20, 04:06
(2♥) - Dbl
Does the double show 3 spades?
If not, what is it?
If so, what's the difference between double and 2♠?
#2
Posted 2014-February-20, 04:15
#3
Posted 2014-February-20, 04:15
But if 1♠ shows five, it can probably be put to better use. I would like to double with two spades and six clubs, or with five clubs and 4 diamonds.
#4
Posted 2014-February-20, 05:01
helene_t, on 2014-February-20, 04:15, said:
Even though our 1S only shows 4+, we suck it up and use Helene's scheme anyway.
2S..might only be 3 if short in hearts (If Opener has 3 hearts, we can hope Partner will keep it open holding 5 spades.)
X="good/bad" style merely competitive in clubs with 2 Spades.
2NT=good/bad competitive in clubs, spade shortness --
3C=the real goods.
Sometimes we even Pass.
#6
Posted 2014-February-20, 15:56
aguahombre, on 2014-February-20, 05:01, said:
2S..might only be 3 if short in hearts (If Opener has 3 hearts, we can hope Partner will keep it open holding 5 spades.)
X="good/bad" style merely competitive in clubs with 2 Spades.
2NT=good/bad competitive in clubs, spade shortness --
3C=the real goods.
Sometimes we even Pass.
I tried passing once. While it worked, it made me feel dirty.
#7
Posted 2014-February-20, 17:02
#8
Posted 2014-February-20, 18:02
kenberg, on 2014-February-20, 17:02, said:
That is precisely the thinking of the creators and practioners of the Support Double --- and it is good thinking, of course. We just believe in the value of other uses for those doubles. We are in the minority.
#10
Posted 2014-February-21, 09:52
aguahombre, on 2014-February-20, 18:02, said:
I can see reasons for other views. I have always thought that one of the downsides of the support double is that it can blur the decision to play in a 4-3 fit. With KJx for support and shortness in the opponent's suit, a 4-3 fit might play well With xxx as support and Qxx in the opponent's suit, maybe the 4-3 is not going to go well. Without support doubles I simply raise on three card support with the first holding and decline to do so on the second. Playing support doubles, I make a support double with either holding. This is not always best.
So yes, I can see the point.
#11
Posted 2014-February-21, 23:25
Support doubles apply at the level of 2♥ or below. (Over 2♠ we would be forcing partner to the 3-level with only a 7-card fit - an ANTI-LAW decision).
When responder shows 5 or more cards, opener can freely raise on 3 pieces. e.g. 1♣-(1♥)-1♠-(2♥), 1♦-(1♠)-2♥-(2♠)
When responder only promises 4, but might have 5 or more, then the double is Support.1♣-(1♦)-1M-(2♦) a double is support as 1M can be only 4 cards. Also 1♦-(1♠)-Double-(2♣), now opener's double is Support for ♥ implied by the negative double.
So if opener can raise on 3 card support, what does the double mean?
1) it should show at most a tolerance and likely a poor fit for responder's suit.
2) it should show 3 cards in opponent's suit (H10x or better preferred).
3) it denies a biddable suit for the 3-level (i.e. not strong 5-5, not 6+).
4) it shows extra strength for previous bidding, enough to suggest penalties if partner has the right hand (strength or trumps suggesting opponents are in a 7-card fit).
Examples for your given auction might be: ♠xx ♥KJx ♦KQx ♣AJ10xx (maximum balanced hand if playing 15-17 HCP 1N opening bids. Playing weak NT this double implies a 15-17 HCP hand.) or perhaps ♠x ♥KJx ♦KQJx ♣AKxxx or similar heavy unbalanced hands.
These doubles are Optional Takeout or DSIP (Do something intelligent, partner) and are more frequent and lucrative than (ancient) penalty doubles: ♠xx ♥KQ10x ♦A ♣AK10xxx - when opponents bid and raise it's unlikely we'll hold 4 top cards in their 8-9+ card fit.
The idea is to increase the frequency we can manage +200 or 300 or more on what's otherwise a part score hand.
Trust demands integrity, balance and collaboration.
District 11
Unit 124
Steve Moese
#12
Posted 2014-February-23, 06:49
aleatory, on 2014-February-20, 18:02, said:
In that case I can't see why a hand with 3 spades would not bid 2♠, and have the double as showing tolerance (2 card support) and playable elsewhere (as helene_t wrote).
I would still call this a support X, but rather than the definition being "always 3 cards", it is "one fewer that would be normally be expected to support directly" and it can also apply at the 3 level.
#13
Posted 2014-February-24, 03:39

Help
